ENVE Carbon Adventure Fork
Article number: | 15-02-00 |
Availability: | Out of stock |
The ENVE Adventure fork provides a lighter weight option for bikepackers and frame builders, while still maintaining reliability and strength. The dynamo light and charger routing is an integrated and protected solution to self-supported bike riders’ needs. Finally, the fork chip option gives builders versatility in the fork by adjusting the axle-to-crown for different bike geometries for alternative bikepacking methods. In a market that’s filled with heavy steel fork options, the ENVE Adventure fork offers bikepackers an opportunity to lighten their overall bike load through our trusted carbon fiber fork expertise.
- Three-Pack Accessory Mounts
- Fender and Rack Mounts
- Reversible Drop-Out Chips for Adjustable Axle-To-Crown and Rake
- Internal Dynamo Routing for Lights and Electronics Charging
Each ENVE fork purchase includes a high quality aluminum expander plug and ENVE branded carbon top cap.
ORDERING
Please note that this fork has a 1-1/8” to 1-1/2” tapered steerer tube, and thus is only compatible with frames accepting this format.
INSTALLATION
Specific knowledge and specialized tools are required to correctly size and install a carbon fork. For these reasons, we highly recommend that these services be performed by an experienced and competent mechanic.
RAKE | 49MM | 55.5MM |
---|---|---|
Axle To Crown | 398mm | 406mm |
Max Tire Clearance | 29" x 2.1" (700x53) | 29" x 2.3" (700x58) |
27.5" x 2.4" | 27.5" x 2.6" | |
Material | Carbon | |
Accessory Mounts | Yes (M5 Bolts) | |
Weight | 575g | |
Steerer Tube Length | 350 mm | |
Crown Race Diameter | 1.5" | |
Brake | Disc | |
Brake Mount | Flat Mount | |
Mount Capacity | ||
Low Rack | 18kg (40lbs) | |
Front Rack | 10kg (22lbs) | |
3-Pack Mount | 6kg per Side (14.5lbs) | |
Axle Compatibility | 12 x 100 mm | |
Compatible Rotor Sizes | 140mm / 160mm | |
Torque Spec | ||
Steerer Tube | 5.5Nm | |
Axle | 8Nm | |
Accessory Bolts | 2Nm |