ENVE Carbon Cyclocross Disc Fork
Article number: | 15-02-00 |
Availability: | In stock (1) |
ENVE has thrown its hat into the ring and fully committed to the use of disc brakes in cyclocross. The new format has met many challenges by alternate manufacturers, and ENVE has answered with many clever, well-engineered features. Rather than adapting the brand's cantilever designed fork and simply adding a post mount for disc brakes, ENVE has implemented the versatility of a thru axle, as well as utilized a 160mm post-mount in order to capitalized on the larger rotor's better modulation and braking power. Additionally, the fork's left leg has a molded cable groove, and a cleverly included a composite clip which eliminates the need for any exterior form of cable management. This makes for a clean, elegant design, not broken up by unsightly zip ties or tape.
ENVE's Disc Cross fork is hollow from one inch above the dropouts, all the way through the crown to the steerer. They also remove all bladders and molding devices after the construction process to ensure low weight. The fork is completely carbon besides the embedded aluminum post-mount studs.
Each ENVE fork purchase includes a high quality aluminum expander plug and ENVE branded carbon top cap.
ORDERING
Please note that this fork has a 1-1/8” to 1-1/2” tapered steerer tube, and thus is only compatible with frames accepting this format.
INSTALLATION
Due to the specific process and tools required, we recommend that ENVE forks be installed by a professional mechanic.
Rake | 47 mm |
Axle To Crown | 395 mm |
Steerer Tube Length | 350 mm |
Steerer Tube Diamater | 1 – 1/8” (1.125”) |
Crown Race Diameter | 1 – 1/2" (1.5”) |
Brake Mount Type | Post Mount |
Compatible Rotor Sizes | 140mm / 160mm |
Weight | ~466g |
Max Tire Clearance | |
700c | 45 mm |
650b | 50 mm |
Material | Carbon |