ENVE Carbon All-Road Disc Fork
Article number: | 15-02-00 |
Availability: | In stock (3) |
Based on the ENVE Road Disc Fork, the construction is entirely unidirectional carbon fiber with a sleek matte finish. The minimalist glossy decals are not attention-grabbing and allude to ENVE's characteristic quiet grace. Choosing the 12mm thru axle standard for security and hassle free wheel changes, the low profile aluminum axle does not have a handle to stick out and grab stray branches or riders. Opting for the Flat Mount disc brake standard to match today's road groups, this fork has a max rotor size of 160mm for riders choosing superior stopping power and modulation. With a max tire size of 35mm with the fender installed, or 38mm without the fender this is the perfect option for anyone wishing to try out the performance benefits of wider gravel tires. Managing the brake housing is a simple task thanks to ENVE's carbon housing clip that securely clings to the left fork leg keeping the housing from moving or slapping about. A feature that might go unnoticed until it comes in handy is the glossy finish on the underside of the fender. While this may not seem significant, glossy finishes are easier to clean and do not hold onto dirt and debris like some matte finishes. Small touches like this are proof that ENVE not only has a creative side but also a keen focus on performance. This Fork can be paired with ENVE's All-Road Fender and Strut.
Each ENVE fork purchase includes a high quality aluminum expander plug and ENVE branded carbon top cap.
ORDERING
Please note that this fork has a 1-1/8” to 1-1/4” tapered steerer tube, and thus is only compatible with frames accepting this format.
INSTALLATION
Specific knowledge and specialized tools are required to correctly size and install a carbon fork. For these reasons, we highly recommend that these services be performed by an experienced and competent mechanic.
Rake | 47 mm |
Axle To Crown | 382mm |
Steerer Tube Length | 400 mm |
Steerer Tube Diamater | 1 – 1/8” (1.125”) |
Crown Race Diameter | 1 – 1/4" (1.25”) |
Brake Mount Type | Post Mount |
Compatible Rotor Sizes | 140mm / 160mm |
Weight | ~450g |
Max Tire Clearance | |
w/ Fender | 700 x 35 |
w/o Fender | 700 x 38 |
Material | Carbon |