Praxis Wave 1X Direct Mount MTB Chainring
|Availability:||In stock (1)|
The new Wave format for Praxis Works single chainrings is akin to the Narrow-Wide style rings that have taken the industry by storm in recent years. Wave however offers some significant advantages that should be noted. Using alternating lateral force on each chain link Wave chainrings actively retain the chain, while still allowing space to shed accumulated mud and debris. There is also less friction when compared to traditional narrow wide rings when run at less than optimal chain lines. For riders running a single speed system this is of little concern, but with ever increasing drivetrain gear counts and the introduction of wider tires, chains and chainrings are being pushed to their limits. Available in a wide range of tooth counts these rings are designed to pair with the Praxis Works Cadet mountain crank but will install on any crank with the 3-Bolt SRAM style interface. There are two options available to dial in your ideal chainline, both DM-A and DM-B rings work on a Cadet crank, but when paired with another manufacturers crank care must be taken to avoid a sub optimal chainline.
Please select your chainring according to your crank and frame style. If you have questions please contact us and we will assist you in selecting the optimal ring for your needs.
|Material||CNC Machined 7075-T6 Aluminum Hard Blk Anodized|
|Recommended Rear Derailleur||Requires Clutch Type Derailleur Shimano Shadow Plus or SRAM Type 2|
|Crank Compatibility||Praxis Direct Mount crank or SRAM 3-Bolt Direct Mount style|
|Chain / Drivetrain Compatibility||10 / 11 / 12 Speed - Shimano, SRAM, KMC|
|Weights / Chain line Offset||DMA / 3 mm||DMB / 0 mm|