Products tagged with 6-Bolt

Alligator Centerlock Adapter lets riders mount 6-bolt ISO disc rotors to compatible Centerlock hubs. Fits 15 mm, 20 mm, and quick-release hub setups, with a two-piece aluminum design and oversized lockring.

Engineered to minimize rotating mass, the Ai2 uses SUS410 stainless and extensive venting for heat control and stability. Available in 140/160 mm with steel bolts included; ideal for road, gravel, CX, and XC use.

Ashima AiNeon two-piece 6-bolt rotor combines a SUS410 stainless braking ring with a 7075-T6 alloy carrier for weight savings and heat stability. Offered in 140, 160, and 180 mm sizes with alloy rotor bolts included.

Single-piece AiRotor 6-bolt rotor with aggressive cut-outs and double-ground braking surfaces for low weight and stable performance. Offered in 140/160/180 mm and supplied with stainless rotor bolts and multiple colors.

Ashima’s Centerlock adapter enables ISO 6-bolt rotor use on Centerlock hubs via a steel carrier and aluminum locating system. Compatible with QR and thru-axle hubs and tightened with a 40 Nm lockring.

Ashima’s Disc Brake Adapter Series provides precise caliper positioning across Flat, IS, and Post-Mount standards. CNC-machined aluminum construction and included hardware ensure consistent alignment and rotor spacing for road, gravel, and MTB platforms.

Ashima rotor bolts in 7075 aluminum (set of 6, ~6.5 g, T20) or steel (set of 12, ~24 g, T25). Standard M5×10 mm threads for 6‑bolt rotors. Choose low weight or maximum durability; hardware for one or two rotors.

Carbon‑Ti’s aero-optimized X‑Rotor is now available in 6‑bolt mounts. Featuring a wind‑tunnel carbon spider, stainless steel braking ring, and titanium rivets for ultralight, UCI-compliant performance in 140 mm and 160 mm sizes.

Carbon-Ti crafts top tier bicycle components made from carbon fiber, titanium, and aluminum. Made 100% in Italy.

Effortlessly dial in your disc brakes with ultra-thin rotor shims. At 0.2mm thick, they ensure perfect alignment when swapping wheelsets, saving time and hassle. Made of stainless steel for lasting performance.

The Extralite Cyber SPD-3+ hubset combines a 66 g front and 140–146 g rear road disc hub. CNC-machined in Italy, with ceramic bearing upgrades, dual-pawl freehub, and EN-certified strength for riders up to 200 lbs.

The Extralite CyberFront SPD-3+ is a 66 g road disc front hub machined from 7075TX aluminum. Featuring a straight-pull design, 12×100 axle, and ceramic bearing upgrades, it balances stiffness and low weight for elite builds.

Extralite has been designing and producing elegant bike components in Italy for the weight conscious rider since 1995.

Since 1973, Fair Wheel Bikes has been a premier destination for top-tier and exotic bicycles and parts.

Built around a 7075 aluminum carrier and stainless steel braking track, the KCNC Kasditor 6-bolt rotor is available in 140, 160, and 180 mm sizes with a 1.8 mm thickness and included hardware.

KCNC’s oversized Centerlock adapter lets riders run ISO 6-bolt disc rotors on Centerlock hubs. The 6061 aluminum design fits QR through 20 mm thru-axle setups and installs with an ISIS / Octalink-style BB tool.

A simple stainless steel 6-bolt rotor option, the KCNC Razor uses a minimalist cutout design, double-ground braking surfaces, and included steel mounting bolts for road, gravel, cyclocross, and mountain brake setups.

SRAM Centerline  X rotor combines aluminum spider with steel braking surface in a two‑piece 6‑bolt design. Available in 140 / 160 / 180  mm with titanium bolts. Rounded edges for UCI‑compliance, low noise, reliable braking across conditions.

SRAM Centerline XR is a road-optimized, two-piece disc rotor with 1.85 mm thickness, aluminum core, and stainless track. Available in 140 / 160  mm, 6‑bolt or CenterLock. Quiet, aerodynamic, and durable braking for eTap AXS setups.